Kevin McCloud On Owning A Woodburner

In this month's issue of Grand Designs Kevin McCloud sheds a little light on one of his essential stove accessories.
"Those of us in possession of a Woodburner have been stoking them into life since autumn, and as long as the wintry nights continue and the mercury tumbles, we won't be stopping anytime soon.
Most woodburners sit in a chimney or alcove, quickly heating the pocket of air around the it to a roasting 60'C - you have to wait an hour or so for the metal to get truly hot...
Hence the need for a stove fan, a simply brilliant idea, it sits on the Woodburner and blows the warm air from around the stove into the room and it is powered entirely by the heat generated below it.
Benjamin Franklin may have been clever enough to invent the Woodburner, but his brain wasn't quite able to get round thermoelectrics!"

A simple flow of heat from hot metal to cold metal through a special layer that generates electricity and turns the fan blades and gently pushes warm air into the room! The blades of the stove fan spin silently and efficiently, circulating the warm air around the room, the blades spinning faster as the stove heats up and then slowing and finally coming to a stop as the stove cools.This can circulate up to 25% more heat into the room, reducing the amount of wood you need to burn and saving money!

Hole In The Wall Fires - A Simple Guide

Just over a decade ago a hole-in-the-wall gas fire was almost impossible to find, with most fires stilll following a traditional period design, while looking brilliant and doing a great job at replicating the look of a real fire, will give out very little heat into the room and uses a very large amount of gas.
Oh how the world has changed, we're less than a month into 2012, the Olympic year, and there 99 products on Fireplace Megastore alone under Hole In The Wall Gas Fires, Class 1 and 2. That doesn't include any Balanced flue or Catalytic Flueless fires that further add to the available options.
An incredible number of UK manufacturer's have created designs, as well as European manufacturers such as Drugasar, have introduced or imported an amazing array of gas fires. You can still get the traditional basket style, some of which have been improved to offer a better heat output..

The most basic open-fronted hole-in-the-wall design is open-fronted, much like the Verine Atina, look realistic but at least 90% of all heat disappears up the chimney and research actually indicates that some designs actually remove heat from the room. Realism tends to change proportionally to efficiency. In terms of looks, inset convector fires, are realistic with contemporary surrounding metalwork and open front. Efficiency is far better than an hole-in-the-wall design and typically around 35 – 40%. Most efficient, but not realistic in some people’s view, is the glass-fronted, gas-inset, hole-in-the-wall fire, such as the Drugasar Global 90 or Apex Influence. Its glass front gives efficiencies of 70% plus, particularly when the design utilises a balanced flue (which requires no chimney– Drugasar are one of the principle manufacturers of balanced flue fires). Not all glass fronted designs are balanced flue – chimney flues and fanned flues are also common. Hole-in-the-wall fires are available with all the popular fuel effects.Although coals remain the most popular choice (and the most realistic), logs come a good second with new fuel effects like dancing flames, pebbles, driftwood and twigs also popular. Traditional hole-in-the-wall designs need coal or log effects – the more modern options simply look out of place.

Electrical Designs
There are a growing number of electric hole in the wall design. These have a number of advantages in that they do not need chimneys or other flues, are often quite shallow in depth and may simply hang on the wall. Like most electric fires, a maximum of 2 kW of heat is available from a built-in, fanned convector.Some, such as the Drugasar Metro 80e, are available as the highly contemporary frameless finish, but most offer that simple hang on the wall installation.

Bio-Ethanol

A recent addition to the hole in the wall range of fires available, and besides electric fires amoung the easiest to install. Unlike gas fires they do not require a chimney, flue or vent in the room and provide 100% efficiency. Another advantage of such fires means that unlike gas fires that require a Gas Installer to service the appliance every 12 months, most bioethanol fires feature only 1 moving part so are incredibly reliable.

Surrounds
A hole-in-the-wall fire is not complete without a surround. Although some people like a design that is just a rectangular alcove in the wall, most want the fire to be surrounded with some sort of fireplace. Marble and stone are the favoured materials for the surround and will probably have to be cut to size for your installation. If you use stone, make sure that it does not have a direct flame playing on the stone as some types can degrade dramatically in these conditions. Marble fireplaces can be made out of natural or conglomerate marble. However, conglomerate marble will start to disintegrate at high temperatures and is more suitable for gas fires. Also consider a brick surround. This will have to be tailor made for your fireplace but bricks are a robust hole-in-the-wall material that will stand high levels of thermal shock.

Installation
Hole-in-the-wall installation can be expensive. If you have an existing chimney, your installer will have to
‘break into’ it above the normal fireplace opening. This probably means inserting a lintel above the new opening to support the chimney brickwork. Below the new opening, the brickwork will have to be built up to the level required for your particular design. It is possible to build a false chimney breast for your proposed hole-in-the-wall fire. This would allow a flue to rise vertically from a conventionally-flued gas or solid fuel design and would accommodate the depth of the unit itself. Check with the instructions of the fire you choose as it will stipulate minimum distances that the fire can be sited from combustible materials.Some hole-in-the-wall fires do not require hearths while other do. For gas fires this depends on what was agreed when the fire was tested for conformity to European standards. Check on the requirements for the fire you want to purchase. If a hearth is required, for a open gas fire, it must be at least 50mm thick, overlap the burning area of the fire by at least 150 mm and project at least 300 mm in front of the foremost flames of burning fuel. It can be either mounted directly below the floor or a ground level – the former option is normally unacceptable on aesthetic grounds. Balanced flue hole-in-the-wall fires are growing in popularity, particularly manufacturers such as Drugasar, Site them on an outside wall and you can forget all the problems of moving lintels, etc.

Interior Design Trends For 2012 - Industrial

Our final piece on upcoming Interior Design Trends for 2012 is Industrial. Our final trend has the potential to be the most popular of all. The Industrial or Utilitarian furniture has the ability to instantly add a designer feel to almost any living space. This is displayed perfectly right in a modern bar. The bare metal and brick walls combined with the antique wood finish complete the industrial look.
We can now look into just a few ways you can create that look with a fire or fireplace. To either contrast existing decor and create that focal point, or to combine with other items in the same style to truly give the whole room that Industrial/Utilitarian feel.

Our first suggestion follows the stripped back, functional ideals of the Industrial design trend. The new T3 range of Burley stoves, consisting of the Holywell, Brampton, Debdale and the Wakerley. These stoves are incredibly efficient, with the claim that 100kg of seasoned logs can be burnt so efficiently that all the ash could fit into just a single pint glass!

You won't find any unnecessary styling features on these stoves which means all the attention is drawn to the incredibly large glass window showcasing the Cyclone(TM) flame picture.
The simple plate steel styling and wooden handles complement each other nicely and would not look out of place in any living space, or industrial workshop for that matter. Further proving just how perfect these stoves are to create the Industrial look.

While most wood-burning stoves will boast primary, second and tertiary combustion to create very efficient appliances the Burley T3 range of stoves offer the previously unheard of Quaternary combustion. Meaning even less unburnt fuel can be wasted up the chimney and giving you yet more heat for your fuel!

These stoves are NOT available online to purchase, however why not give Fireplace Megastore a call, one of Burley's biggest dealers in the UK and place an order for one of these truly revolutionary stoves!

Our final, but by no means our least favourite suggestion is the Apex Rivas 60 or Rivas 100 gas fire from Apex. Offering a stunning twin level trim available in 5 different finishes from the industrial brushed stainless steel to the incredibly contemporary polished chrome finish. The realistic log or pebble fuel effect can offer both the traditional or contemporary fuel effect.
The heat output of 5.5kW with a high efficiency of up to 75% means that you can heat your room, without heating the outside world at the same time!
As you can see (right) when combined with other industrialist elements in the room, or it can be used as a focal point on a chimney breast to heat your living room on those cold wintery nights!

Interior Design Trends For 2012

With 2011 now in the record books, with a much warmer winter than previous years. Many of you may have elected to stick with that tired old fire. "If it ain't broke, don't fix it" is the phrase that springs to mind and rightfully so, why should you spend a large amount of money on a brand new fire, often following trends that less than three months later are 'so last year'. 
So in the following few entries, with the help of Channel 4 Homes, we will details some of the upcoming trends for 2012 and how to get that 'bang-on-trend' fire, fireplace or stove.


Mid-Century Modern
We've long been fans of this look and despite its mainstream popularity for the past two or three years, its popularity is still not dying down. If anything, it is becoming even more popular. With fashions returning that first became popular in the 50's/60's/70's.
The first fire we suggest to create that Mid-Century modern look is the Smeg L30FAB flueless gas fire. This stunning flueless gas fire is available in four different colours, ranging from the bold red pictured above to Cream, Silver & Black. With a heat output of 2.6kW and 100% efficiency this fire can serve both as a bold fashion statement and as an incredibly efficient complimentary heat source for your living room, dining room or kitchen! 
For a more 70's look the why not combine the Brilliant NewDawn fire, available in both gas and electric with some retro wall paper to create a focal point on a chimney breast. Shown on the left in Hot Corian to match the bright red leather of a sofa. There is a lovely corner group available from House2Home Megastore.
Both these fires would be perfect to create that Mid-Century Modern trend that will become "Hot" property in 2012. 

One final fire to create that Mid-Century Modern look is the Apex Saverno with Art Deco Trim. While the Art Deco movement became popular in the 1920's, it was still prevalent throughout the mid-20th Century. This Stunning fire with simple horizontal detailing and contrast between the brushed steel and matt black fascia levels offers an eye-catching focal point. These fires also have the simplicity, unlike gas fires that mean they can be simply wall mounted, such as electric fires and then used without a flue, chimney or vent. 
With more and more high street stores are embracing the look running with it in their ranges - from furniture and wallcoverings, right through to accessories, so you can match your fire to your decor and create that incredibly desirable mid-century modern look.

Hot Property For 2012

With just a week left in 2011, and with our first snowfall across most of the UK last week, most people, along with ourselves are focusing on 2012. We thought we'd take a look at some of the things that we forsee becoming 'hot' property for 2012.

Bio-Ethanol Fires: 
These  eco-friendly and incredibly simple and elegant fires are becoming more and more popular with energy prices rising and installation, servicing and other costs of gas and soli-fuel appliances to consider Bio-Ethanol are beginning to become the appliance of choice for both heat and a stunning flame effect. While the fact that most bio-ethanol fires only feature one moving part which means there is almost nothing to go wrong with the fire. This means an end to expensive engineer/gas fitter visits and an end to struggling to find spare parts.


Other amazing feature is that some of the fires are portable, allowing for use both indoors during the colder nights or using Citronella Gel outside during the summer to provide that amazing ambience while keeping the insects away. While some people claim that the Bio-Ethanol costs an arm & a leg, most larger internet retailers are able to sell larger quanities at substanitally cheaper prices to that of a local showroom or garden centre.

You can find an incredible selection of  bio-ethanol fires; portable, freestanding and wall-mounted from the House 2 Home Megastore


Stoves In Colour:

With stoves becoming more and more popular as the idea of carbon-neutral heating and reduced fuel bills becomes more mainstream most people will start looking into purchasing a wood-burning or multifuel stove.
The general consensus of the market is matt black cast iron or steel is the only available colour. But why settle with just matt black?
With manufacturer's such as Firebelly or Carron offer many more colours, while Carron offer enamel colours that may chip or discolour due to heat Firebelly offer a wide variety of colours or heat resistant paint that are hard-wearing and can be touched up. Combined with the optional Stainless steel legs as pictured can give you an incredibly unique stove.

Drugasar Fires:
Drugasar fires are set to become the must-have gas fires. With the Global Range being an incredibly high quality range of gas fires for Chimney's & balanced flue systems that are also much more affordable than some other similar fires on the market. With the Eclipse, Aura, Cara & Grace suites also set to become more and more popular. The Ceraglass interior has also become a must-have, with not many other fires offering such a contemporary finish.
“We develop products that continuously meet the highest stipulations and as such retain the level of quality we are used to. Where homes are becoming increasingly better insulated, we offer products for example that still delievr a lovely fire but with less capacity," 

Choosing A Stove - The Guide

As this is a fairly expensive exercise it really does makes sense to get it right first time. Think long term!

Common sense, planning, using quality products and seeking professional advice are paramount to your success when buying and installing a stove. Using solid fuel requires a little effort but the joy of owning a stove during those cold winter months is unbeatable.

A little reading is required, a little legwork, some research and some comparisons will help you make a few key decisions. These actions will help ensure a successful and safe installation and you will have many years of enjoyment and pleasure from your stove.

Stove guide - Building Regulations

Stove installation is covered by building regulations “Document J” Hetas – Heating Equipment Testing and Approval Service. Hetas registered installers are trained to adhere to these building regulations. 

Safety First! - Hetas Certified Engineers

We strongly recommend that you employ the services of a qualified / certified Hetas engineer. Please do not compromise your safety, the safety of your property or your loved ones and neighbours by performing an installation yourself. 

A badly installed stove can lead to an explosion, a fire or a build up of poisonous gasses and any of these events can lead to a loss of life or critical injury.

Stove guide - Important First Things To Consider

Purchasing stoves over the internet can be fraught with danger if you do not do your research before pressing the buy button.
Remember all stove installations are subject to building regulations and come under the control of your local authority. When you buy from a reputable stove retailer you will get the complete package: advice, guarantee and the right stove, if you've done your research! 
Before purchasing a stove, check with your local authority if you are in a smoke control area.  

You should not burn wood or bituminous coal in a smoke control zone unless the stove has been granted Exemption from the Clean Air act by DEFRA, find some DEFRA approved stoves here. You should be familiar too with the Clean Air Act .

Always follow the advice of your stove manufacturer regarding fuels suitable for your appliance. A good stove retailer will be able to advise on how to get the best results when burning these fuels. Remember you will invalidate your appliance guarantee if you burn a fuel that is not recommended by the stove manufacturer.

Stove guide - Chimney Flue – (the engine behind your stove)

All wood burning or multi fuel stoves require a class 1 chimney flue.  As the majority of stoves are more than 78% efficient it is imperative that the chimney flue is better than adequate. 

The chimney flue is what drives the appliance and the more efficient the stove is, the more efficient the flue system has to be in order to exhaust the combustion gasses quickly into atmosphere. 

Wherever possible the stove should be flued from the top of the appliance into the chimney and not from the back. Flue gasses naturally want to rise in a vertical fashion and encountering bends of more than 30 degrees to the vertical will slow and cool the evacuation of these gasses down,  resulting in possible condensation / deposit problems in the chimney flue. If bends are needed then they must be rounded and not sharp.

Flue Liners

It is common for most stove installations to be recommended a double skin, flexible, stainless steel flue liner. 

These come in 2 grades:
316 - with a guarantee of 10 years.
904 - with a guarantee of 20/25 years.

When either system is installed, I would strongly advise that they be insulated with either Vermiculite, Pearlite, Leca or a non combustible wrap in order to maintain the flue gas temperature. It is imperative that a flue liner is fitted to be both water-tight and insulated correctly.

As the guarantee implies, these lining systems are not permanent. If the stove is oversize or not operated efficiently or the liner is not installed correctly, then the life of these liners can be much less than the period of the guarantee. This can often lead to tension between the installer and you the householder as to what is the cause of the failure. 

A more permanent cure for an oversize or inefficient chimney flue is a “cast in situ” system provided by “Shellcast” or “Cico”. Although this may cost a couple of hundred pounds more to install, you will get a more permanent and durable system that will give many years of service.

Be aware that before any lining system is installed you must ensure that the existing chimney flue should be swept clean and pressure tested for air tightness.

Top Tip - For maximum safety chimney flues should be swept twice a year by a competent person registered to the National Association of Chimney Sweeps – NACS - or the Guild of Master Sweeps or be Hetas approved.

   

Home Is Where The Hearth Is

3. Your Hetas engineer will advise on hearth construction and ventilation requirements as again both are covered by building regulations. As all combustion processes require a supply of oxygen then there is an ongoing need to replenish any oxygen that is used in the process. Stoves with an output of more than 5kw require an additional supply of air from an external source.

The Silent Killer

Carbon monoxide is a product of incomplete combustion and is formed when there is a lack of adequate ventilation or if there is a blockage or restriction in the chimney flue. Carbon monoxide is a gas that kills, so for safety reasons, prior to using the appliance a battery operated carbon monoxide detector should be installed in the room.

Kilowatt Capacity

4. The kilowatt output of the stove should be very closely matched to the kilowatt requirement of the space you are wanting to heat.  For example a standard room of 15ft length by 14 ft wide by 7ft high only needs a stove with an output of 3 kilowatts.  

Installing an oversize stove will result in possible low firebox temperatures which in turn will lead to condensates and deposits forming in the flue system. These, are highly corrosive and can lead to failure of stainless steel flue systems. 




Burning Real WoodThere is a basic difference between a wood burning and a multi fuel stove, and it's all to give the favoured fuel optimum burning conditions. Wood burns best on a bed of ash, whereas solid fuel needs a grate capable of supplying primary / combustion air. If you want to burn a combination of both wood and solid fuel then this can only be done on a multi-fuel stove.

Before burning any wood, it must be either seasoned for a minimum period of 18 months or have been kiln dried down to an ideal of less than 20% moisture – the drier the better! 

Burning non seasoned logs (Green Wood) leads to creosote type condensates in the flue system. These will not only block the chimney flue but are also highly flammable and will lead to destructive chimney fires. We strongly recommend that you do not burn non seasoned wood in your stove.

Do not allow the stove to “tick over” for long periods especially if you have installed any type of flexible stainless steel flue liner. 

Before and after any slumbering or overnight burn you should “open up” the stove for an hour to increase the fire box temperature. This will help to create the correct conditions in the chimney flue to allow the combustion gasses to escape into atmosphere and not to condense on the inner surface of the flue. 

The purchase of a magnetic temperature gauge, to fit on the off-take pipe (the pipe that connects the stove to the chimney flue), will alleviate any low temperature problems. This device shows the best operating temperature at a glance.

Smokeless Fuels

All smokeless fuels used should be Hetas approved for use in a closed appliance and most importantly do not burn “neat” or “raw” petroleum coke as this can cause severe damage to the firebox. This fuel has very little ash content and consequently burns at very high temperatures. The ash content of the fuel is there to protect the fire bars, the grate and the firebox of the stove from the very high temperatures generated during the combustion process.

Ventilation

Natural ventilation is a good thing. Avoid using extract fans in the locality of the stove as this leads to a lowering of pressure in the building which can cause the combustion gasses to be drawn “back down” the chimney flu and into the room.

Stove Buying Golden Rules

Maintain sufficient temperature in the firebox to ensure the combustion gasses can escape into the atmosphere.

• Follow the stove manufacturer’s guidelines and Stove Retailers advice.
• Purchase a carbon monoxide detector.
• Building regulations are there to ensure maximum safety – abide by them
• Use a certified Hetas Engineer
• Talk to your local authority before spending your hard earned cash

High-Efficiency Fires Help Gas Bills Fall By 2 Percent

According to British Gas, average gas bills fell 2% in the first three months of 2010, despite the coldest winter for a generation. The average gas bill – between January and March of this year – for the 8m homes supplied by the company fell to £373, compared to £381 in the same period of 2009.

A large part of the reason for this is that consumers are increasingly seeing the benefits of installing more efficient central heating boilers and gas fires. For example, if you have an open fronted gas fire that is over 5 years old, it could be as little as 25% efficient, using as much as 9.45kW of energy to generate only 2.4kW of heat, with the rest of the heat going straight up your chimney.Fireplace Supermarket's latest gas fires, such as the innovative Apex Capacious and Verine Orbis models are contributing towards this gas efficiency trend. They are incredibly energy efficient of up to 89% so under 5kW of gas being used to put 4kW of heat into your living room. This means that by upgrading your old open fronted gas fire to a high efficiency glass fronted fire, you can save 57% on your gas fuel costs and have 46% more heat.

Do I Need A Flue Liner?

If you have a standard masonry chimney and wish to install a woodburning or multifuel stove, it is highly advisable to fit a stainless steel flexible flue liner with the stove.

Corinium Flue Systems recommends fitting a flue liner for the following reasons;

• Masonry chimneys, particularly in older properties, are likely to have cracks. Without a liner, any fumes from the stove and creosote formed will leak through cracks in the masonry, possibly exiting in other rooms in your house or in your neighbours'.

• Creosote is a tar like substance that is formed when fumes emitted from the stove cool down as they rise. When these gaseous fumes cool down, any substances contained within the fumes condense and are deposited on the inside of the flue or chimney. A flue liner has a smooth inner skin with less surface area for creosote to be deposited onto, whereas in a masonry chimney it is likely to build up in cracks or crevices. Creosote is highly flammable and is often the cause of chimney fires.

• A flue liner is much narrower than a chimney and is the same diameter from top to bottom. This continuous, consistent pathway will allow the flue gases to exit the chimney much quicker, with less chance of deposits. A flue liner's narrow, consistent diameter also means that it will warm up much quicker than a chimney. This results in an improved draw, making it easier to get a fire burning without lots of smoke back into the stove. A flue liner will retain the heat longer than a chimney after the fire has died out, which means it will be easier to start a new fire the morning after the night before.

• A flue liner is generally more straightforward to sweep. Creosote deposits formed will be harder to remove from a large chimney, especially build ups in cracks or crevices.

A question frequently asked is whether the flue should be insulated - this is done by backfilling the chimney around the flue liner. This is not necessary, but can be beneficial if you have a particularly cold chimney i.e. external, very exposed and very large. Normally the warming of the air in the chimney surrounding the liner during burning is sufficient for insulation.

They are also frequently asked whether a flue liner is necessary to comply with building regulations. It does not state in the building regulations that a flue liner has to be fitted with a stove. However, you must be sure that the chimney is in good working condition and has been sufficiently maintained. The majority of installers and retailers will recommend fitting a flue liner; particularly in older properties, as it is safer and more efficient.

We do not advise asking your installer not to fit a flue liner purely on the basis of cost. Once you have made the one off investment, your stove and flue liner, if properly maintained, will last for years. Most stove and flue manufacturers offer a warranty on their products - for example, Corinium offer a ten year warranty on our flue liner, subject to conditions of use.

Buy British: Fires & Stoves

These are troubling times for Britain's manufacturing sector, once a relative bright spot in the country's lacklustre recovery, which contracted at its fastest pace in more than two years in October, as new orders plummeted.

But at a time when the weather is closing in and people are looking to replace their fire or stove, many will simply head down to their local DIY or home-improvement store and buy an off-the-shelf stove or fire. However there is quite a high likelihood that these stoves and fires were built overseas, while there may be nothing wrong with stoves and fires, they may serve and satisfy all your heating needs. 

However it is always nice to know exactly where your stove or fire has been built. In this article we have a look at some of the most popular British products on the market and have a look into where they are created.

The Portway 2 Multi fuel stove is a contemporary steel stove which features a large viewing window and is exceptionally easy to operate.

With a choice of 2 stove colours; charcoal or black, and 3 leg heights this is a highly versatile stove.

Features: 

• Exemption from the Clean Air Act 1993 and suitable for smokeless zones as recommended by DEFRA
• Top or rear 125mm (5”) flue connection
• Simple operating controls
• Airwash to keep the glass window clean and clear
• Easy access, easy carry ashpan
• Tough, 5mm thick steel stove body
• Cast iron door and grates 

You can also choose to customise your stove with our range of decorative window inserts or vitreous enamel doors in Ruby Red or Arctic Grey.

The Portway Range of stoves are built by BFM Europe, the company is based in Stoke-on-Trent with a 51,000 sq ft purpose built plant, housing the most up-to-date manufacturing, sales and training facilities in the industry, including the latest sheet metal technology, R&D department and purpose built laboratories.
The Portway range are showroom exclusive, meaning you CANNOT purchase them online, however you can view and purchase the stove from Fireplace Megastore

Paragon & Matchless are both part of Charlton & Jenrick, startedby two friends in 1986 and based in Telford they produce a wide range of gas and electric fires, ranging from the stunning Chorus hole in the wall gas fire to the Quartet balanced flue fire and a stunning range of electric fires. Twenty four years later the Charlton & Jenrick Group moved into new premises, although just a stones throw from the original premises, are very substantially larger at 42,000sqft. It will be home to the group's gas fire manufacturing and product development operations, which employs 43 people.
The group is now a major player in the fireplace market employing over 120 staff across 3 sites in the UK and sales in excess of £12m. With it's 4 main brands, Katell, Paragon, Fireline & Matchless they are involved in almost all product groups including gas and electric fires, timber, marble & stone fireplaces and suites plus wood burning stoves.  

This high efficiency balanced flue fire is the Verine Marcello balanced flue gas fire, perfect for modern homes without a chimney or flue and features a natural stone fuel bed. The Marcello can be wall hung or inset into most external walls with stainless steel trim.

This stunning gas fire is almost unique in that it can be hung on the wall or inset so not to protrude into the room. While boasting a massive 87% efficiency meaning you wont be wasting energy while heating your living room, boasting 4.2kW of heat output, enough for even some of the larger living spaces

Much like The Portway Range of stoves, The Verine Marcello is built by BFM Europe, the company is based in Stoke-on-Trent with a 51,000 sq ft purpose built plant, housing the most up-to-date manufacturing, sales and training facilities in the industry, including the latest sheet metal technology, R&D department and purpose built laboratories.

The cheapest we found it was at Fireworld HERE

Apex Oakland

Following the incredible success of the Apex Intense and Apex Devotion Apex have decided to bring out a new product. The Apex Oakland.

This stunning hang on the wall electric fire features the innovative and energy saving LED flame effect employed on the Intense and Devotion, combining with the flat black glass fascia to create a very contemporary and modern feel. Ideal for that minimalist feel.

Offering a 2Kw heat output, the Oakland is ideal to quickly take the cold edge off of almost any sized room. The unique LED flame effect can be dimmed to one of three settings, for that subtle feel or to truly give the impression of a roaring fire.

The white stone fuel effect adds a further contemporary feel and a thermostatic control means that the temperature can be set and maintained without even having to leave the comfort of your chair.

First Glimpse: Apex Biofuel Fires

With Apex's new range of Bio-Ethanol fires now on sale, Fires | Fireplaces | Stoves got to have a glimpse at two of their freestanding Bio-Ethanol Fires. The Apex Affinity and the Apex Duplex.

The first fire we got to see was the Apex Duplex, a dual purpose unit, combining a 100% efficient bio-ethanol fire with a stylish coffee table. This stunning piece of contempory furniture can instantly become the centrepiece of and modern living space, replacing the traditional and bulky fireplace and surround.

At first look the Duplex in it's stunning matt black finish with tempered glass fire guards is the definition of contemporary furnishing and when the fire is lit, giving up to 3kW of heat this fire instantly becomes the focal point of the room and bathing the room in that lovely warm glow.
The fire is easy to use, simply fill the reservior and light using a taper, the 1 litre capacity gives up to 5.5 hours of burn time and one of the main advantages of bio-ethanol is that they do not require any flue, installation or ventilation so can be placed almost anywhere in the house!

The other fire we got to have a look at was the Apex Affinity, this freestanding white fire comes complete in a white gloss finish that can contrast beautifully with a dark carpet or darkwood floor, also offering a heat output of upto 3kW these fires offer greater heat output that that of an electric fire without the sound of a noisy fan and at greater levels or reliability.

The sleek modern finish to the Affinity is capped with 2 sheets of tempered glass to protect any children or pets from the hot flames in the centre. The twin levels of the surround help this unit stand out from the very symmetrical world of traditional fireplace surrounds.

Both these fires, The Duplex and the Affinity have the flexibility to be situated either against a wall or in the centre of the room, allowing you to surround the fire as a centrepiece or to situate it against a wall much like a conventional fireplace.

They also boast the flexibility of just having the natural, uninhibited flames dancing in the fire or the fire can be purchased with an additional pebble fuel effect to add that extra little element to these stunning bio-ethanol fires.