Top 10 tips for Reducing Your Heating Costs by Installing a Wood Burning Stove

On freezing winter days like the ones we have managed to almost dodge completely this winter, could there anything nicer than coming in from the cold and curling up in front of a wood-burning stove? Aside from the romantic vision of cups of hot chocolate in front of a glowing stove, did you know that installing a wood-burning stove could potentially reduce your energy bills?

Even with the recent gas and electricity price cuts that have been announced by some of the biggest energy suppliers this week (following their steep price rises last year), it is definitely worth considering alternative forms of home heating to reduce your energy costs and over-reliance on gas and electricity.

So, to give us the low-down on wood-burning stoves and how to maximise our heating whilst minimising our energy bills, the chaps at gr8fires have shared their top 10 tips, plus we have an exclusive offer for all Queen of Easy Green™ readers, see below.

Top 10 tips for Reducing Your Heating Costs by Installing a Wood Burning Stove

1.     Install a wood-burning stove
That’s the inevitable starting point for saving money with a wood-burning stove. This will reduce your heating costs by cutting your reliance on central heating. You can turn off the radiators in rooms that you don’t need to keep warm and use the stove as your main source of heat.
2.     Choose the right stove
Picking the best stove for your needs is essential in helping you to save money. If you don’t fit a stove with a heat output suited to the room, it will reduce your chances of cutting your heating costs. Opting for a more expensive model with a greater output to heat a larger room will pay for the price difference in no time at all.
3.     Consider a wood-burning boiler stove
Installing a boiler stove is one way of further cutting your heating bills. You can use the heat generated by your stove to also heat the water in your home. The dual use of your stove means you can cut your central heating costs even further.
4.     Use properly seasoned wood
The type of wood you use has a huge impact on the efficiency of your stove. Using seasoned wood -which has been cut, split and left to air for at least a year – is the best way to minimise your heating costs. Seasoned wood contains far less moisture, burns more efficiently and heats your home more quickly than freshly cut wood. Use a log store to allow your wood to season and to help you build up a supply that should last you all winter.

5.     Control your stove’s air supply properly
Both the bottom (primary) and top (secondary) air vents should be open when you light your stove. Once the fire is burning well, you should be able to close the primary vent and control the fire using only the secondary vent for a more efficient burn.
6.     Get your chimney swept regularly
As a minimum you should get your chimney swept annually before you start using the stove regularly. Ideally, it should be swept every three to four month when the stove is in regular use.
7.     Use dry kindling to start the fire
Using small pieces of wood to get the fire going will heat your stove more quickly and, as a result, your room will start heat more efficiently once you add logs. The sooner your stove is up to temperature, the sooner the convection process can have an impact on the rest of the room.
8.     Use free wood
One of the best aspects of installing a stove is that you can easily find a supply of free fuel. From saving friends and family from a trip to the tip to salvaging fallen trees from your nearest forest (with the landowner’s permission), there are plenty of opportunities to heat your home for free.
9.     Don’t be tempted to throw another log into the stove. Once you have loaded the stove with logs, don’t continually top up your stove as they burn. Wait until all the logs have been burnt to glowing embers before reloading the stove. Continually adding more wood is considerably less efficient.
10.  Keep the door closed
It is a simple tip, but one that causes unnecessary confusion for many stove users. Once the stove is lit, the door should be closed. This increases the efficiency of the burn by up to 60 per cent.

Hole In The Wall Fires - A Simple Guide

Just over a decade ago a hole-in-the-wall gas fire was almost impossible to find, with most fires stilll following a traditional period design, while looking brilliant and doing a great job at replicating the look of a real fire, will give out very little heat into the room and uses a very large amount of gas.
Oh how the world has changed, we're less than a month into 2012, the Olympic year, and there 99 products on Fireplace Megastore alone under Hole In The Wall Gas Fires, Class 1 and 2. That doesn't include any Balanced flue or Catalytic Flueless fires that further add to the available options.
An incredible number of UK manufacturer's have created designs, as well as European manufacturers such as Drugasar, have introduced or imported an amazing array of gas fires. You can still get the traditional basket style, some of which have been improved to offer a better heat output..

The most basic open-fronted hole-in-the-wall design is open-fronted, much like the Verine Atina, look realistic but at least 90% of all heat disappears up the chimney and research actually indicates that some designs actually remove heat from the room. Realism tends to change proportionally to efficiency. In terms of looks, inset convector fires, are realistic with contemporary surrounding metalwork and open front. Efficiency is far better than an hole-in-the-wall design and typically around 35 – 40%. Most efficient, but not realistic in some people’s view, is the glass-fronted, gas-inset, hole-in-the-wall fire, such as the Drugasar Global 90 or Apex Influence. Its glass front gives efficiencies of 70% plus, particularly when the design utilises a balanced flue (which requires no chimney– Drugasar are one of the principle manufacturers of balanced flue fires). Not all glass fronted designs are balanced flue – chimney flues and fanned flues are also common. Hole-in-the-wall fires are available with all the popular fuel effects.Although coals remain the most popular choice (and the most realistic), logs come a good second with new fuel effects like dancing flames, pebbles, driftwood and twigs also popular. Traditional hole-in-the-wall designs need coal or log effects – the more modern options simply look out of place.

Electrical Designs
There are a growing number of electric hole in the wall design. These have a number of advantages in that they do not need chimneys or other flues, are often quite shallow in depth and may simply hang on the wall. Like most electric fires, a maximum of 2 kW of heat is available from a built-in, fanned convector.Some, such as the Drugasar Metro 80e, are available as the highly contemporary frameless finish, but most offer that simple hang on the wall installation.

Bio-Ethanol

A recent addition to the hole in the wall range of fires available, and besides electric fires amoung the easiest to install. Unlike gas fires they do not require a chimney, flue or vent in the room and provide 100% efficiency. Another advantage of such fires means that unlike gas fires that require a Gas Installer to service the appliance every 12 months, most bioethanol fires feature only 1 moving part so are incredibly reliable.

Surrounds
A hole-in-the-wall fire is not complete without a surround. Although some people like a design that is just a rectangular alcove in the wall, most want the fire to be surrounded with some sort of fireplace. Marble and stone are the favoured materials for the surround and will probably have to be cut to size for your installation. If you use stone, make sure that it does not have a direct flame playing on the stone as some types can degrade dramatically in these conditions. Marble fireplaces can be made out of natural or conglomerate marble. However, conglomerate marble will start to disintegrate at high temperatures and is more suitable for gas fires. Also consider a brick surround. This will have to be tailor made for your fireplace but bricks are a robust hole-in-the-wall material that will stand high levels of thermal shock.

Installation
Hole-in-the-wall installation can be expensive. If you have an existing chimney, your installer will have to
‘break into’ it above the normal fireplace opening. This probably means inserting a lintel above the new opening to support the chimney brickwork. Below the new opening, the brickwork will have to be built up to the level required for your particular design. It is possible to build a false chimney breast for your proposed hole-in-the-wall fire. This would allow a flue to rise vertically from a conventionally-flued gas or solid fuel design and would accommodate the depth of the unit itself. Check with the instructions of the fire you choose as it will stipulate minimum distances that the fire can be sited from combustible materials.Some hole-in-the-wall fires do not require hearths while other do. For gas fires this depends on what was agreed when the fire was tested for conformity to European standards. Check on the requirements for the fire you want to purchase. If a hearth is required, for a open gas fire, it must be at least 50mm thick, overlap the burning area of the fire by at least 150 mm and project at least 300 mm in front of the foremost flames of burning fuel. It can be either mounted directly below the floor or a ground level – the former option is normally unacceptable on aesthetic grounds. Balanced flue hole-in-the-wall fires are growing in popularity, particularly manufacturers such as Drugasar, Site them on an outside wall and you can forget all the problems of moving lintels, etc.

Hot Property For 2012

With just a week left in 2011, and with our first snowfall across most of the UK last week, most people, along with ourselves are focusing on 2012. We thought we'd take a look at some of the things that we forsee becoming 'hot' property for 2012.

Bio-Ethanol Fires: 
These  eco-friendly and incredibly simple and elegant fires are becoming more and more popular with energy prices rising and installation, servicing and other costs of gas and soli-fuel appliances to consider Bio-Ethanol are beginning to become the appliance of choice for both heat and a stunning flame effect. While the fact that most bio-ethanol fires only feature one moving part which means there is almost nothing to go wrong with the fire. This means an end to expensive engineer/gas fitter visits and an end to struggling to find spare parts.


Other amazing feature is that some of the fires are portable, allowing for use both indoors during the colder nights or using Citronella Gel outside during the summer to provide that amazing ambience while keeping the insects away. While some people claim that the Bio-Ethanol costs an arm & a leg, most larger internet retailers are able to sell larger quanities at substanitally cheaper prices to that of a local showroom or garden centre.

You can find an incredible selection of  bio-ethanol fires; portable, freestanding and wall-mounted from the House 2 Home Megastore


Stoves In Colour:

With stoves becoming more and more popular as the idea of carbon-neutral heating and reduced fuel bills becomes more mainstream most people will start looking into purchasing a wood-burning or multifuel stove.
The general consensus of the market is matt black cast iron or steel is the only available colour. But why settle with just matt black?
With manufacturer's such as Firebelly or Carron offer many more colours, while Carron offer enamel colours that may chip or discolour due to heat Firebelly offer a wide variety of colours or heat resistant paint that are hard-wearing and can be touched up. Combined with the optional Stainless steel legs as pictured can give you an incredibly unique stove.

Drugasar Fires:
Drugasar fires are set to become the must-have gas fires. With the Global Range being an incredibly high quality range of gas fires for Chimney's & balanced flue systems that are also much more affordable than some other similar fires on the market. With the Eclipse, Aura, Cara & Grace suites also set to become more and more popular. The Ceraglass interior has also become a must-have, with not many other fires offering such a contemporary finish.
“We develop products that continuously meet the highest stipulations and as such retain the level of quality we are used to. Where homes are becoming increasingly better insulated, we offer products for example that still delievr a lovely fire but with less capacity," 

What Is LPG?

Liquefied petroleum gas (also called LPG, GPL, LP Gas, or liquid propane gas) is a flammable mixture of hydrocarbon gases used as a fuel in heating appliances and vehicles.
 LPG is composed primarily of propane and butane, while natural gas is composed of the lighter methane and ethane. LPG, vaporised and at atmospheric pressure, has a higher calorific value (94 MJ/m³ equivalent to 26.1kWh/m³) than natural gas (methane) (38 MJ/m³ equivalent to 10.6 kWh/m³), which means that LPG cannot simply be substituted for natural gas.

Predominantly in rural parts of the UK, LPG can provide an alternative to electricity and heating oil. LPG is most often used where there is no access to piped natural gas.LPG can be stored in a variety of ways. LPG, as with other fossil fuels, can be combined with renewable power sources to provide greater reliability while still achieving some reduction in CO₂ emissions. But just because you are restricted to LPG does not mean you cannot have an attractive an efficienct heating appliance. One website has over 200 different fires, fire baskets, stoves and wall heaters capable of running on LPG. Everything from the versatile yet stylish Drugasar Style range of balanced flue wall heaters, ideal for community buildings, warehouses or even office spaces to the incredibly stylish and affordable Verine Atina XL with cream stone fascia for designer living.
More traditional items are also available in LPG such as the Esse 500 Flueless gas stove, combining a traditionally cast iron body with the latest in Catalytic Flueless gas fire technology to create a stove that requires no flue while giving up an impressive 3.3kW of heat.
So while using LPG may restrict your options slightly it doesnt mean you can't have the fire of your dreams and spent many a cold wintery night in front of it and enjoying the ambience only a living flame can bring.

Gas, A Clean Fuel

There is a great deal of debate about fuels, ranging from Carbon pollution, cost of extraction and the effect on the environment. Gas is and always will be a very clean fuel. For example, when burning wood or similar solid fuel, small particles will be released (smoke). These are unburnt parts of fuel which are then wasted, you will also be left with waste by-products (ash).But when burning gas there are no particles released and your flue system stays, more or less, clean at all times.

Gas systems also allow you to easliy regulate the temperature in the house. With DRU gas fires this is all done via a Thermostatic remote control. All their systems are calibrated in the factory to ensure your fire runs as efficiently as possible. Wasting as little energy as possible and ensuring the maximum amount of heat is coming into the property rather than heating the outside world.

Gas is also, per kWh one of the cheapest sources of energy. It's no wonder really, why more and mroe consumers, both across the UK & Europe are choosing efficient, clean and attractive gas fires designed by Drugasar.

Adding to the appeal of DRU gas fires is that Europe is rich with gas, ourselves in the UK, as well as Norway, Holland and Russia all benefit from large reserves of gas, with expectations that further large reserves will be discovered in the future. Products such as gas fireplaces are becoming more and more efficienct, with up to 87% efficiency on the Metro 130. And with increasing advances in insulation, less and less heat is required to heat our homes. It is expected that for at least the next 100 years we will have sufficient gas reserves. However that does not mean we can take it for granted. This is also why Drugasar are always researching more and more techniques to extract more heat from the gas energy. One such addition is the MaxVent system popular with the Global range of gas fires. The complete Drugasar Range Of Gas Fires are available from Fireplace Megastore

Drugasar Explain The Balanced Flue System

The balanced flue system is the technology behind most DRU gas fires and gas wall heaters. DRU engineers from the Netherlands invented the system in the 1930s. It has since become the industry standard for high efficiency and performance. Many companies have copied the original system, but none have been able to match the superior standards that are the hallmark of DRU products.

So what is the balanced flue system and how does it benefit your home or workplace?

Comfortable and efficient

Most conventional gas fires have an open-fronted fireplace that is inset into a standard sized chimney. The air that the fire uses to create its flames is drawn from inside your living room and waste products are expelled up the chimney. (See drawing 1)

So while this kind of fire may be pleasing to the eye, it may not be so kind to your breathing or your bank balance! It requires constant ventilation to keep it burning (ever heard the saying ‘It’s stuffy in here’?). And because of this it consumes more energy and fuel than you can reasonably afford.

In contrast, a balanced flue gas fire is room-sealed using a glass front. It has a sophisticated flue that uses natural convection to draw the air from outside the building for combustion and expels it back to the outside through a separate compartment of the flue. (See drawing 2)

So there is no loss of comfort and minimal fuel consumption. And because the fire is not open at the front it is much safer to use.

No chimney – no problem

DRU balanced flue fires and wall heaters can be installed with or without a conventional chimney.

If there is no chimney in your home, the flue can be fitted through an outside wall or through the roof. It is possible for the flue to be 4 metres long horizontally or 10 metres high vertically. So you have a great deal of flexibility when deciding where to locate your fire.

If, on the other hand, you would like to have all the advantages of balanced flue technology, combined with the aesthetic appeal of a traditional chimney, this can be done! All you will need is a special flue liner installed in your chimney, using the chimney shaft to replicate the balanced flue effect.

A further advantage of this is that your fire can be installed in the classic way, using a fire surround to look like a traditional fireplace. Alternatively it can be mounted further up the chimneybreast as a ‘hole-in-the-wall’ or ‘hanging’ fire.

Either way, you will enjoy the combination of a beautiful fire that uses modern, efficient technology to bring you endless comfort and pleasure.

For the full range of Drugasar Fires, ideal for almost any home,with or without a chimney visit http://www.fireplacesupermarket.com/drugasar

Choosing A Stove - The Guide

As this is a fairly expensive exercise it really does makes sense to get it right first time. Think long term!

Common sense, planning, using quality products and seeking professional advice are paramount to your success when buying and installing a stove. Using solid fuel requires a little effort but the joy of owning a stove during those cold winter months is unbeatable.

A little reading is required, a little legwork, some research and some comparisons will help you make a few key decisions. These actions will help ensure a successful and safe installation and you will have many years of enjoyment and pleasure from your stove.

Stove guide - Building Regulations

Stove installation is covered by building regulations “Document J” Hetas – Heating Equipment Testing and Approval Service. Hetas registered installers are trained to adhere to these building regulations. 

Safety First! - Hetas Certified Engineers

We strongly recommend that you employ the services of a qualified / certified Hetas engineer. Please do not compromise your safety, the safety of your property or your loved ones and neighbours by performing an installation yourself. 

A badly installed stove can lead to an explosion, a fire or a build up of poisonous gasses and any of these events can lead to a loss of life or critical injury.

Stove guide - Important First Things To Consider

Purchasing stoves over the internet can be fraught with danger if you do not do your research before pressing the buy button.
Remember all stove installations are subject to building regulations and come under the control of your local authority. When you buy from a reputable stove retailer you will get the complete package: advice, guarantee and the right stove, if you've done your research! 
Before purchasing a stove, check with your local authority if you are in a smoke control area.  

You should not burn wood or bituminous coal in a smoke control zone unless the stove has been granted Exemption from the Clean Air act by DEFRA, find some DEFRA approved stoves here. You should be familiar too with the Clean Air Act .

Always follow the advice of your stove manufacturer regarding fuels suitable for your appliance. A good stove retailer will be able to advise on how to get the best results when burning these fuels. Remember you will invalidate your appliance guarantee if you burn a fuel that is not recommended by the stove manufacturer.

Stove guide - Chimney Flue – (the engine behind your stove)

All wood burning or multi fuel stoves require a class 1 chimney flue.  As the majority of stoves are more than 78% efficient it is imperative that the chimney flue is better than adequate. 

The chimney flue is what drives the appliance and the more efficient the stove is, the more efficient the flue system has to be in order to exhaust the combustion gasses quickly into atmosphere. 

Wherever possible the stove should be flued from the top of the appliance into the chimney and not from the back. Flue gasses naturally want to rise in a vertical fashion and encountering bends of more than 30 degrees to the vertical will slow and cool the evacuation of these gasses down,  resulting in possible condensation / deposit problems in the chimney flue. If bends are needed then they must be rounded and not sharp.

Flue Liners

It is common for most stove installations to be recommended a double skin, flexible, stainless steel flue liner. 

These come in 2 grades:
316 - with a guarantee of 10 years.
904 - with a guarantee of 20/25 years.

When either system is installed, I would strongly advise that they be insulated with either Vermiculite, Pearlite, Leca or a non combustible wrap in order to maintain the flue gas temperature. It is imperative that a flue liner is fitted to be both water-tight and insulated correctly.

As the guarantee implies, these lining systems are not permanent. If the stove is oversize or not operated efficiently or the liner is not installed correctly, then the life of these liners can be much less than the period of the guarantee. This can often lead to tension between the installer and you the householder as to what is the cause of the failure. 

A more permanent cure for an oversize or inefficient chimney flue is a “cast in situ” system provided by “Shellcast” or “Cico”. Although this may cost a couple of hundred pounds more to install, you will get a more permanent and durable system that will give many years of service.

Be aware that before any lining system is installed you must ensure that the existing chimney flue should be swept clean and pressure tested for air tightness.

Top Tip - For maximum safety chimney flues should be swept twice a year by a competent person registered to the National Association of Chimney Sweeps – NACS - or the Guild of Master Sweeps or be Hetas approved.

   

Home Is Where The Hearth Is

3. Your Hetas engineer will advise on hearth construction and ventilation requirements as again both are covered by building regulations. As all combustion processes require a supply of oxygen then there is an ongoing need to replenish any oxygen that is used in the process. Stoves with an output of more than 5kw require an additional supply of air from an external source.

The Silent Killer

Carbon monoxide is a product of incomplete combustion and is formed when there is a lack of adequate ventilation or if there is a blockage or restriction in the chimney flue. Carbon monoxide is a gas that kills, so for safety reasons, prior to using the appliance a battery operated carbon monoxide detector should be installed in the room.

Kilowatt Capacity

4. The kilowatt output of the stove should be very closely matched to the kilowatt requirement of the space you are wanting to heat.  For example a standard room of 15ft length by 14 ft wide by 7ft high only needs a stove with an output of 3 kilowatts.  

Installing an oversize stove will result in possible low firebox temperatures which in turn will lead to condensates and deposits forming in the flue system. These, are highly corrosive and can lead to failure of stainless steel flue systems. 




Burning Real WoodThere is a basic difference between a wood burning and a multi fuel stove, and it's all to give the favoured fuel optimum burning conditions. Wood burns best on a bed of ash, whereas solid fuel needs a grate capable of supplying primary / combustion air. If you want to burn a combination of both wood and solid fuel then this can only be done on a multi-fuel stove.

Before burning any wood, it must be either seasoned for a minimum period of 18 months or have been kiln dried down to an ideal of less than 20% moisture – the drier the better! 

Burning non seasoned logs (Green Wood) leads to creosote type condensates in the flue system. These will not only block the chimney flue but are also highly flammable and will lead to destructive chimney fires. We strongly recommend that you do not burn non seasoned wood in your stove.

Do not allow the stove to “tick over” for long periods especially if you have installed any type of flexible stainless steel flue liner. 

Before and after any slumbering or overnight burn you should “open up” the stove for an hour to increase the fire box temperature. This will help to create the correct conditions in the chimney flue to allow the combustion gasses to escape into atmosphere and not to condense on the inner surface of the flue. 

The purchase of a magnetic temperature gauge, to fit on the off-take pipe (the pipe that connects the stove to the chimney flue), will alleviate any low temperature problems. This device shows the best operating temperature at a glance.

Smokeless Fuels

All smokeless fuels used should be Hetas approved for use in a closed appliance and most importantly do not burn “neat” or “raw” petroleum coke as this can cause severe damage to the firebox. This fuel has very little ash content and consequently burns at very high temperatures. The ash content of the fuel is there to protect the fire bars, the grate and the firebox of the stove from the very high temperatures generated during the combustion process.

Ventilation

Natural ventilation is a good thing. Avoid using extract fans in the locality of the stove as this leads to a lowering of pressure in the building which can cause the combustion gasses to be drawn “back down” the chimney flu and into the room.

Stove Buying Golden Rules

Maintain sufficient temperature in the firebox to ensure the combustion gasses can escape into the atmosphere.

• Follow the stove manufacturer’s guidelines and Stove Retailers advice.
• Purchase a carbon monoxide detector.
• Building regulations are there to ensure maximum safety – abide by them
• Use a certified Hetas Engineer
• Talk to your local authority before spending your hard earned cash

Advise On Installing A Gas Fires

Acquisitions X-Fire 1200

All Gas Fires must be installed and serviced by a GAS SAFE Registered Engineer. The Engineer will survey your property and ensure that all requirements of the Installation Manual are met to ensure your fire is installed correctly and safely. All GAS SAFE Engineers are regularly audited by GAS SAFE to ensure they are working in line with current regulations.

We recommend that all gas fires are serviced every 12 months. This should be done regardless of how often the fire is used. There are number of issues which can effect a fire functioning correctly and safety - blockages in the gas pipes, gas leaks, chimney blockages etc.

It is easy to blame the gas fire when it fails to function however a very large amount of claims are not related to the gas fire. When a gas fire does not operate, the problem can be nothing to do with a fault within the gas fire. Below are some very common causes which will stop a gas fire functioning. Before making any claims please check these site related issues are not causing the problems. This will eliminate costly call out charges.

Drugasar Eclipse Suite

1. Gas Pressure - a common cause of a gas fire shutting down while it is operating is that the gas pressure is not correct. This problem can be more noticeable when switching on other gas appliances within the property like boilers etc. A drop in pressure will mean that the safety device on fire will shut the fire down to protect you. Contact Transco or your gas supplier regarding upgrading your gas pipe work.
2. Chimney Draw Is Too Strong - the draw on the chimney is causing the pilot flame to lift away from the thermocouple making the safety device to shut the fire down - Contact a flue specialist
3. Chimney Draw Is Too Weak - the draw is not strong enough, this could be because the chimney has become blocked, causing the fire to spill hazardous fumes into the room. This is very dangerous. The safety device senses the amount of oxygen in the air and will shut the fire down. - Contact a flue specialist.
4. No Power - A remote control fire needs a power source. If it is powered by a mains supply has the fuse blown or the power switched off? - Contact an electrician. If it is battery powered - check and change the batteries.
5. Incorrect Installation - All gas fires are supplied with an installation manual. This shows how to fit the fire in line with the manufacturer's instructions and the CE approval to ensure it is safe. Ensure you have a copy of the Installation Manual before starting to install a fire. The warranty will be invalid if the fire has been wrongly installed. When a fire is installed by a GAS SAFE Registered Engineer he will issue you a certificate showing the work that has been done and confirming that it is safe.
6. Flueless Fires - Flueless Fires have an excellent safety record. If a Flueless Fire shuts down after running for a number of minutes check all ventilation requirements have been met before operating the fire again. A vast majority of fires have a ODS unit fitted which will shut the fire down if the oxygen levels in the room reach a dangerous level.

REMEMBER - ALWAYS USE A REGISTERED GAS SAFE ENGINEER FOR ALL GAS FIRE INSTALLATION AND SERVICING WORK ASK TO SEE THE ENGINEERS REGISTRATION CARD AND IF IN DOUBT PHONE GAS SAFE.

Find a fantastic selection of Fires, Fireplaces, Stoves and much more from the likes of Fireplace Megastore, Fireworld, Fireplace Supermarket with House2Home Megastore also boasting a growing range of fires.

How To Cut Your Energy Bills...

Almost nine in 10 households (89%) will be rationing their energy use this winter to save on bills, meaning a potential 23 million households will be switching off or turning down their heating, according to uSwitch. It says an average £224 increase in energy prices within the last 12 months has left 87% of consumers worried about the cost of this year's winter fuel bill.
In October The Guardian asked readers for their tips on cutting energy bills.
They were contacted by a retired 66-year-old retired academic who worked at a London university. She spent half her working life caring for her children and doing voluntary work, which reduced her pension, so she now makes an effort to keep her heating bills down. She has taken rationing her energy use to a new level, and she wanted to share her methods.

"People talk as if very high energy bills are inevitable, whereas often these could be cut a little or a lot, and in ways that can improve our quality of life. I've just had my quarterly bills: electricity £7.44 (+ VAT + standing charge = £12.89) and gas £7.88 (+ VAT but minus dual fuel discount = £4.75).

"If you asked me to score my quality of life from one to 10, I would definitely say 12 plus.

"I am a pensioner, at home and with the computer on most of the time, who pays well under £100 for my annual, total, combined gas and electricity bills. I have worked out gradually how to do this, and now find it so easy it is automatic.

"Although I am very lucky in my housing and neighbourhood, at least some of my savings could be made by anyone. A few ideas are fairly costly to set up, but they could be paid for many times over in savings on later annual bills – especially given that carbon fuel prices are only going to keep rising.

"Three years ago I moved house, and chose an end-of-terrace home with a south- and west-facing living room, and no nearby tall trees or buildings. The living room has patio doors and even in deepest winter, on sunny days, it heats up to more than 20C. If you have any blank walls that face east or west, but preferably south, could you possibly put in a double-glazed window? The larger the better. Patio doors heat up rooms much more than ordinary windows do.

"Insulated cavity walls and roof increase the winter warmth. I have carpets here – much cosier than the laminate floors in my last home – and cream 'blackout' curtains which give excellent insulation.

"I do not use central heating. Instead, I use the warm living room almost all the time in winter. Okay, the other rooms are chilly. But does that matter as long as you only need to use them briefly during the day, and you have one really warm room, or two for larger families?

"My main heating is a wood-burner, and for that you have to have a chimney or some kind of wall outlet. My burner, with installation by a plumber, cost about £500. Even a large room is fine with a small burner, and they last forever.

"The other expenses are logs – about £200 a year. So that does bring my fuel bills up to nearly £300, and you do need somewhere to store the logs without having to carry them far. There is very little ash, which only needs clearing out into a small bag about once a month. The annual chimney sweep costs about half the price of checking the gas boiler.

"You can get burners with in-built boilers, which heat radiators and water tanks. Instead, I always keep a filled kettle on my burner, and add that hot water to pans or to an electric kettle whenever I need boiling water. I slow-cook stews on the burner, after heating them on a hob, and you can hang clothes around for very quick drying.

"My glass-fronted burner is a beautiful companion. Throughout the year, I collect twigs and lumps of fallen wood in nearby parks to use for kindling and to start a quick blaze in the morning.

"For unheated bedrooms you can use one or two – or three – hot water bottles (from the burner kettle) and lots of warm covers. It can be more pleasant to sleep in a warm bed in a cold winter room than in a hot summer bedroom where you cannot control the temperature.

"Maybe you are thinking about the misery of cold kitchens and bathrooms. During winter I prepare food, and the hot water for cooking and washing up, in the living room – so need to spend little time in the kitchen. Jackets and jerseys are handy for longer spells in the kitchen. Living in inner London I have shops near by. I use them as my main larder, so I can do without a freezer, and I turn on my fridge only briefly to cool white wine, or occasionally for the grandchildren's ice-cream. Food keeps well in cool kitchens.

"I buy milk every other day, and keep the carton in a jug of cold water. Shopping every day or two ensures that food is fresh and varied. Another advantage is not having a fridge full of stuff near its end-of-shelf life, which helps to reduce overeating and throwing away stale food.

"The bathroom is the other great energy consumer. Older people will remember how in the 1940s-1950s we tended to have a bath once or twice a week. Advertisers have lately persuaded us that it is unhealthy and disgusting to shower less than at least once a day. Yet a quick wash, with water from a kettle, is fine for most days – or a leisurely wash in front of the burner. Baby wipes are a great invention, and I can guarantee no one will guess if you haven't had a shower for five days.

"Maybe you are thinking that a good quality of life demands several warm though hardly used rooms, plenty of hot water on tap, and lots of electric equipment on standby. But think about all the things you could buy instead of burning money on fuel bills."

That's how our academic cuts her costs. Saving that much money clearly takes a lot of effort, so would you be willing to go that far in the name of smaller utility bills?

While her ideas seem to do a great deal to reduce fuel bills overall and the idea of using a woodburning stove to provide the main heat for a room is a great idea. Especially when using a Stove fan to help circulate the warm air around the room.

However it seems to me that her determination to cut energy bills is driving the cost of general living up, for example I think it would be cheaper to pay for the cost of heating water for a shower every day or every other day rather than a constant supply of baby wipes!
Also the cost of running a modern, energy efficient Fridge Freezer also would be less than the cost of buying food on a daily basis from a local shop, which can often be more expensive than a weekly or half-weekly shop from a supermarket.

Do I Need A Flue Liner?

If you have a standard masonry chimney and wish to install a woodburning or multifuel stove, it is highly advisable to fit a stainless steel flexible flue liner with the stove.

Corinium Flue Systems recommends fitting a flue liner for the following reasons;

• Masonry chimneys, particularly in older properties, are likely to have cracks. Without a liner, any fumes from the stove and creosote formed will leak through cracks in the masonry, possibly exiting in other rooms in your house or in your neighbours'.

• Creosote is a tar like substance that is formed when fumes emitted from the stove cool down as they rise. When these gaseous fumes cool down, any substances contained within the fumes condense and are deposited on the inside of the flue or chimney. A flue liner has a smooth inner skin with less surface area for creosote to be deposited onto, whereas in a masonry chimney it is likely to build up in cracks or crevices. Creosote is highly flammable and is often the cause of chimney fires.

• A flue liner is much narrower than a chimney and is the same diameter from top to bottom. This continuous, consistent pathway will allow the flue gases to exit the chimney much quicker, with less chance of deposits. A flue liner's narrow, consistent diameter also means that it will warm up much quicker than a chimney. This results in an improved draw, making it easier to get a fire burning without lots of smoke back into the stove. A flue liner will retain the heat longer than a chimney after the fire has died out, which means it will be easier to start a new fire the morning after the night before.

• A flue liner is generally more straightforward to sweep. Creosote deposits formed will be harder to remove from a large chimney, especially build ups in cracks or crevices.

A question frequently asked is whether the flue should be insulated - this is done by backfilling the chimney around the flue liner. This is not necessary, but can be beneficial if you have a particularly cold chimney i.e. external, very exposed and very large. Normally the warming of the air in the chimney surrounding the liner during burning is sufficient for insulation.

They are also frequently asked whether a flue liner is necessary to comply with building regulations. It does not state in the building regulations that a flue liner has to be fitted with a stove. However, you must be sure that the chimney is in good working condition and has been sufficiently maintained. The majority of installers and retailers will recommend fitting a flue liner; particularly in older properties, as it is safer and more efficient.

We do not advise asking your installer not to fit a flue liner purely on the basis of cost. Once you have made the one off investment, your stove and flue liner, if properly maintained, will last for years. Most stove and flue manufacturers offer a warranty on their products - for example, Corinium offer a ten year warranty on our flue liner, subject to conditions of use.

Office and industrial heating

DRU gas heating systems are used extensively in offices, workshops, industrial units and even large factories throughout the UK. They can be used as the main source of heating for offices and industrial premises. They can also be used for supplementary heating in extensions to buildings or in portable accommodation.
DRU office and industrial heating systems can be found in a wide variety of commercial premises, including a central London hedge fund company, light industrial workshops in many inner city locations, offices and studios by the River Thames in Twickenham and the distribution centre of an international tool manufacturer in Nottinghamshire.
Heating for Leisure
DRU heaters have been installed in many leisure environments, such as sports halls, visitor centres and even in zoos. This is because DRU Art and Style series heaters can be run on LPG and need no electrical supply, so they are suitable for remote sites, portable buildings, livestock accommodation and animal houses.
Heating for Military
DRU heaters have been installed in a large number of military establishments, from the far South West of England to the far North of Scotland. They are also used in British Forces headquarters in Cyprus and other overseas locations.
They provide robust, efficient and reliable heating for military barracks, which are often in remote locations and subject to harsh weather conditions. DRU Art series heaters are most suitable for these kinds of premises as they can be run on LPG and require no electrical supply. So there is no danger of heat loss in the event of power failure.

Heaters for all applications
The DRU range of office and industrial heaters includes balanced flue models with heat outputs from 2 – 11 kw and powered flue models with forced air convection from 7 – 16 kw. They are available in a wide selection of colours and designs to compliment plush offices or more functional industrial and workshop environments.


Contemporary gas, electric and wood fires
DRU is Europe’s leading manufacturer of contemporary gas fires which, as well as looking great in the home, can add warmth, comfort and style to hotels, pubs, restaurants and even office receptions! To see the full range of DRU gas electric and wood burning fires, visit: http://www.fireplacemegastore.co.uk
Heating Services
DRU provides a wide range of services for office and industrial heating throughout the UK. Operating through a national network of DRU approved GAS SAFE registered heating installers, we provide free surveys, consultations, installations, warranty work and servicing. You can contact us about servicing your existing DRU heaters. We also stock spare parts for many older and obsolete models.

Wood Burners Could Be The Answer To Heating Your Home This Winter

The ever-rising cost of gas, oil and electricity has fired the imagination of householders trying to save on their heating bills. It’s not only good news for environment, it’s also providing a growing business for people involved in forestry and those selling wood and log-burning stoves.

The experience of George Newburn, who runs Lytham Logs on the Fylde, is typical. He supplies high quality natural hardwood and softwood from sustainable plantations in Cumbria.

‘It’s amazing how many people are contacting me because they’ve had a wood-burning stove installed that day,’ he says. ‘I ran out of wood in the middle of January last year so I’ve now got 300 cubic metres of logs in stock.’

That’s a lot when you consider a normal sized rubbish skip hold just five cubic metres. ‘Wood is carbon neutral and people are starting to accept the environmental arguments,’ he adds. ‘People are using more wood and less coal, which has to be shipped from places like Poland.’

George does have some words of caution, however. ‘If we keep burning hardwood at the current rate we will run out one day. Softwood is cheaper and quicker to grown. In fact, it grows twice as quickly but it doesn’t burn twice as fast.

‘People with open fires don’t like it because it has a higher resin content and that causes it to spit. But it’s fine for wood-burners and we need to start educating people about the difference.’

John Stanley launched Vesta Stoves in Scarisbrick five years ago. ‘We are probably one of the only companies in the country that actually makes wood-burners rather than importing them,’ he says.

‘Wood-burners are increasing in popularity all the time and they do have lots of advantages. With gas prices going up and up, they are seen as a real investment and they are much more efficient and controllable than an open fire where about 80 per cent of the heat goes up the chimney.

‘If you burn £200 a year on an open fire, that would come down to about £50 a year with a wood-burner. The payback is almost instant.

‘Wood-burners with boilers are becoming massively more popular now as well. They are a big investment – you need a different kind of water tank for one thing – and the payback time is nearer ten years but they can reduce fuel bills dramatically.’

Nick Astley, who runs Fuelmizas, retailing a wide range of wood-burners in Ribchester, believes the economic argument is the main driver. ‘The powers that be would like to think people are buying wood-burners because they are carbon neutral and envionmentally-friendly but it’s really the price of fuel that’s causing the change.

‘Some are put off because they have concerns about living in restricted areas but you can now get Defra-approved wood-burners for smoke-free zones.

‘Others have visions of having to go out to collect wood, chop it with an axe, stack it and season the logs. But life’s too short. Like most people, we simply have the wood delivered.’ Cue George.

An impressive range of wood and multifuel stoves are available from Stove Megastore, as well as a heat powered stove fan that can help distribute heat around the room, further reducing the amount of fuel needed.